Thing I made: Toilet Flush Handle

 I made a thing.




It's a glue-in replacement for a broken toilet flush handle.  In hindsight I should have made it curved instead of a sharp angle.  The retaining nut wouldn't slide over the corner so I had to assemble it in place.  That means I'll have to break it to remove it.  Lesson learned.

On a related note, I got a Prusa.  This is a nice piece of kit.  This is my first real print on it.  It's a little disappointing that PrusaSlicer doesn't have functionality to send jobs to the printer.  I'll spin up OctoPrint on a Raspberry Pi if/when I ever find a Pi Zero 2W.  All the usual suspects are sold out. :/

Comments